3D Equipment

Plastic PLA monofilament PLA for 3D printing (FDM), made by polymerization (thermoplastic aliphatic polyester of lactate monomer), 2.85mm diameter, on plastic bobbin, 0.5kg, 68m

Plastic ABS monofilament for 3D printing (FDM) made by polyaddition (Acrylonitrile and Styrene copolymer), 1.75mm, on plastic bobbin, 0,8kg, 333m

Plastic nylon monofilament for printing on a 3d printer technology (by fff), polyamide, filament diameter 3 mm on plastic spool, in carton box, weight of the filament without spool 1kg, yarn length 200 meters

Plastic ABS monofilament for 3D printing (FDM) made by polyaddition (Acrylonitrile and Styrene copolymer), 1.75mm, on plastic bobbin, 0,8kg, 333m

Plastic HIPS monofilament for 3D printing (FDM) made by polyaddition (Butadiene and Styrene copolymer), 1.75mm, on plastic bobbin, weight 0.8kg, length 320m

Plastic HIPS monofilament for 3D printing (FDM) made by polyaddition (Butadiene and Styrene copolymer), 1.75mm, on plastic bobbin, weight 0,8 kg, length 334 m

Plastic ABS monofilament for 3D printing (FDM) made by polyaddition (Acrylonitrile and Styrene copolymer), 2.85mm, on plastic bobbin, weight 0.75kg, length

Photopolymer resin (Acrylic photosensitive polymer, content of monomer units <90%, grey liquid), without ethanol, for 3D printing (SLA) high-resolution capacity in a cartridge 1L. (1.25 kg.)

Photopolymer resin (Acrylic photosensitive polymer, content of monomer units <90%, light yellow liquid), without ethanol, for 3D printing (SLA) high-resolution capacity in a cartridge 1L. (1.25 kg.)

Photopolymer resin (Acrylic photosensitive polymer, content of monomer units <90%, crear slightly yellow liquid), without ethanol, for 3D printing (SLA) high-resolution capacity in a cartridge 1L. (1.25 kg.)

Photopolymer Resin (Acrylic photosensitive polymer, greenish-blue) for 3D printing (SLA) high-resolution capacity in a cartridge 1L. (1.25 kg.)