Нормализаторы сигналов

Linearized Thermocouple Input Module, Type T, Input -100...+400 C, Output 0...+10 V

Analog Voltage Input Module, Input -10...+10 V, Output 0...+10 V, 10 kHz Bandwidth

Strain Gage Input Signal Conditioner, Input -10...+10 mV, Output -10...+10 V, Excitation +3.333 V

Isolated Analog Voltage Input Module, Input -50...+50 V, Output +1...+5 V

Single Channel DIN Backpanel, 24V Power with CJC

Analog Voltage Input Module, Input 0...+10 V, Output 0...+5 V

Single Channel DIN Backpanel, 5V Power with No CJC

Bag of 500 Sockets for 8B Modules

Analog Voltage Input Module, Input 0...+300 V, Output 0...+5 V

Linearized 4-Wire RTD Input Module, Pt-100, 0...+600 C, output 0...+5 V

Module direct connection, Pass Through

General Purpose Input Module, with DC Excitation, Input -7...+7 V, Output -10...+10 V

DIN Rail, 6.2mm RTD Input Loop-Powered Converter, input Pt100 (-200...+650C), output 4...20 mA

Strain Gage Input Signal Conditioner, Input 0...+10 mV, Output 0...+10 V, Excitation +3.333 V

4 Channel Backpanel for SCMD Modules, DIN-Rail Mounting

Isolated Analog Voltage Input Module, Input -20...+20 V, Output 0...+10 V

Frequency Input Module, Input 0...50 kHz, Output 0...+10 V

Interface Board, DB25 to Screw Terminal, Panel Mount, DIN mount

Analog Voltage Input Module, Input 0...1 kHz, Output 0...+5 V

Analog Voltage Input Module, Input 0...100 kHz, Output 0...+5 V

Linearized 2- or 3-Wire RTD Input Module, Pt-100, -100...+200 C, output: 0...+10 V

Linearized 4-Wire RTD Input Module, Pt-100, 0...+100 C, output 0...+5 V

Analog Voltage Input Module, Input 0...+1 V, Output 0...+5 V

Thermocouple Input Module, Type S, Input 0...+1750 C, Output 0...+10 V

Module direct connection, Pass Through, no Switch

DIN EN 50022-35 x 7.5 (slotted steel), 1 meter length

Potentiometer Input Module, Input 0...10 kOhm, Output 0...+10 V

Analog Current Input Module, Input 4...20 mA, Output 0...+10 V

Module direct connection, Pass Through, with Switch

Analog Voltage Input Module, Input -40...+40 V, Output -5...+5 V, 20 kHz Bandwidth

Servo/Motor Controller Module, Input -5...+5 V, Output -5...+5 V

Analog Voltage Input Module, Input -1...+1 V, Output -10...+10 V, 4 Hz Bandwidth

Thermocouple Input Module, Type R, Input 0...+1750 C, Output 0...+10 V

Analog Voltage Input Module, Input -40...+40 V, Output 0...+10 V, 4 Hz Bandwidth

Analog Voltage Input Module, Input -50...+50 mV, Output 0...+10 V, 4 Hz Bandwidth

DSCP20 Programming Cable